R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions

Gregoriou Brothers Refrigeration Since 1979Frosty-Freeze
R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions  R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions
This kit is for Recharging Refrigerant R-410a Systems. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the
mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
1) 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with color coded charging gauge for R410a systems. 
1)  SPECIAL, R410a, COLOR CODED, "CHECK & CHARGE-IT"  Gauge.
1) CPS AD87 R410a adapter Fitting
Normal R410a low-side system pressure while unit is running is; 120 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system. 
FOR USE BY QUALIFIED Refrigeration and Air Conditioning TECHNICIANS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
WARNING**
ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
CONTENT UNDER PRESSURE.
VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped. 
If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you. 
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments. R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions This kit is for Recharging Refrigerant R-410a Systems. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the "mini-split" A/C systems. As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems. This recharge kit includes; (1) 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured. (1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with color coded charging gauge for R410a systems. (1) SPECIAL, R410a, COLOR CODED,
CHECK & CHARGE-IT" Gauge. (1) CPS AD87 R410a adapter Fitting Normal R410a low-side system pressure while unit is running is; 120 to 150 psi. depending on the outdoor and indoor temperature. Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it. The charging hose on this kit has the larger 5/16" connection with valve core depressor. You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger
5/16") to prevent mixing, so now you will have everything you need to recharge a R410a system. ****FOR USE BY QUALIFIED Refrigeration and Air Conditioning TECHNICIANS. USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A. DO NOT MIX WITH ANY OTHER REFRIGERANT. Refrigerant Can Notes **WARNING** *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS. *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS. *CONTENT UNDER PRESSURE. *VAPOR HARMFUL SKIN AND EYE IRRITANT. DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY. ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT. USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A. DO NOT MIX WITH ANY OTHER REFRIGERANT. FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!! DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F. HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST. DO NOT PUNCTURE OR INCINERATE THIS CAN. DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F. Do not refill can. KEEP OUT OF REACH OF CHILDREN. Gregoriou Brothers Refrigeration Since 1979Frosty-Freeze
R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions  R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions
This kit is for Recharging Refrigerant R-410a Systems. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the
mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
1) 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with color coded charging gauge for R410a systems. 
1)  SPECIAL, R410a, COLOR CODED, "CHECK & CHARGE-IT"  Gauge.
1) CPS AD87 R410a adapter Fitting
Normal R410a low-side system pressure while unit is running is; 120 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system. 
FOR USE BY QUALIFIED Refrigeration and Air Conditioning TECHNICIANS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
WARNING**
ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
CONTENT UNDER PRESSURE.
VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped. 
If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you. 
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
R410a, A/C Gas, Large 38 oz. STOP LEAK, UV Dye, Color Coded Gauge, Instructions
This kit is for Recharging Refrigerant R-410a Systems. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the
mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
1) 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with color coded charging gauge for R410a systems. 
1)  SPECIAL, R410a, COLOR CODED, "CHECK & CHARGE-IT"  Gauge.
1) CPS AD87 R410a adapter Fitting
Normal R410a low-side system pressure while unit is running is; 120 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system. 
FOR USE BY QUALIFIED Refrigeration and Air Conditioning TECHNICIANS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
WARNING**
ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
CONTENT UNDER PRESSURE.
VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.